Easy Flybean Installation:
FlyBean is easy to install with a few basic tools. Follow the instructions below and you’ll be enjoying FlyBean in a flash!
Very important!
Don’t forget to give your wall a good scrub before you start installing. A clean wall is key to making sure everything sticks nice and tight.
1. Determine where you’d like to install your FlyBean wall unit.
From the floor up, measure 66”. This is where you’ll center the 10” wall decal.
2. Measure and mark the outer decals.
From the center, measure out 14”, using a level, to mark the outer 8 decal locations. It helps to use a 45° level to accurately place these 4 locations.
3. Place the 10” wall decal.
Remove the backing from the decal. Avoid pulling or stretching the decal when you’re placing it. Gently smooth the decal onto the wall using your fingers and hand.
3. Place the 10” wall decal.
Remove the backing from the decal. Avoid pulling or stretching the decal when you’re placing it. Gently smooth the decal onto the wall using your fingers and hand.
4. Mark your floor tossing location.
Using a FlyBean vinyl floor sticker, or another point of reference, mark the tossing distance to 8 ft.
That’s it!
Enjoy playing FlyBean!